STEEL FOR COLD WORKING
Tool steel suitable for cold work are used mainly for production of cutting and pressing tools.
The typical properties of tool steel are high surface hardness, toughness, tensile strength and high wear resistance. This makes tool steel ideal for cold work, in particular for the production of cutting and pressing tools, the production of smaller plastic molds requiring large abrasion resistance, pressed dies, drawing tools, thread rolling dies, etc.
| W.Nr. | DIN | AISI | ROUND BARS | FLAT BARS |
|---|---|---|---|---|
| 1.1730 | C45W3 | ✓ | ✓ | |
| 1.2067 | 100Cr6 | L1/L3 | ✓ | |
| 1.2210 | 115CrV3 | L2 | ✓ | |
| 1.2080 | X210Cr12 | D3 | ✓ | ✓ |
| 1.2436 | X210CrW12 | D6 | ✓ | ✓ |
| 1.2379 | X153CrMoV12 | D2 | ✓ | ✓ |
| 1.2842 | 90MnCrV8 | O2 | ✓ | ✓ |
| 1.2510 | 100MnCrW4 | O1 | ✓ | ✓ |
| 1.2767 | X45NiCrMo4 | 6F 7 | ✓ | ✓ |
| 1.2746 | 45NiCrMoV16-6 | ✓ | ||
| 1.2360 | X48CrMoV8-1-1 | ✓ | ✓ | |
| 1.2363 | X100CrMoV5-1 | A2 | ✓ | ✓ |
| 1.2358 | 60CrMoV18-5 | ✓ | ||
| 1.2550 | 60WCrV8 | S1 | ✓ | ✓ |
EN 
CZ